Hypothetical for now, but I'm currently working with a local company and trying to gauge people's interest in a 3d printed stock for the chiappa M6 22/12g survival rifles to replace the factory molded polypropylene foam insert.

The new insert would have additional .22 storage similar to pictured and a bit more shallow so the end of the round can actually be grabbed instead of trying to pry it out with a finger nail. It would retain the same 12g and cleaning kit storage holes and likely be printed from some kind of TPU filament to give it a more tacky/grippy feel. Whether it still floats can't be determined without a prototype in hand but the weight difference would probably be negligible. The entire insert would be mostly hollow with a honeycomb pattern inside for rigidity under recoil.

Not sure how many people actually own these things and would be interested since they definitely don't have the same following as the little badger.

Hey guys,

Sorry if this isn’t allowed, I hardly ever use Reddit so I’m not super familiar with the posting norms or whatever.

I was just curious if anyone knows anything about the possibility of any stores restocking any variant of the SKS, even the ATI stock one.

I know cabelas website had them up until maybe a month ago? I’m curious if they’ll ever restock.

I don’t own an SKS but I own a handful of rifles and shotguns. I’d like an SKS, but I genuinely don’t care that much about the condition or the numbers matching aspect of it, hence why I considered the Cabelas ati stock one.

Thanks a bunch and sorry again if this post isn’t formatted perfectly, been lurking this sub for months but never posted.

I was trying a new box ammo and put it under the spotter and the twist is fairly significant. That video is the worst of it and after filming other boxes the twist was not as bad. I was wondering if this is something I should be concerned about? The gun is accurate and I was hitting the mark at 600 yards after a few tries.

thanks!

EDIT: the barrel is a 1 in 10” twist rate, bullet is .30 06 Hornady ELD X 178 g

From left to right:

Swedish M96 Mauser made at Carl Gustaf in 1917.

Swedish M38 Mauser made by Husqvarna in 1941.

Lee Enfield No5 Mk1 Jungle Carbine made by Fazakerly in December 1946.

K98k made by JP Sauer in 1943 and refurbished after the war by who knows what country (not the Russians though).

1954 Tula SKS.

1966 TIPO 2 M1 Garand with a 1944 dated springfield reciever, has mix of italian, springfield, and winchester parts.

Running out of storage space lol.

As title. My new restricted rifle arrived in Canada two weeks ago and since then myself and a couple buddies all have not received approval for the transfer by the CFO. We all called and were told this can take several more weeks...

Is there anything that can be done about this? It seems this is only happening in BC as my friends from Alberta and Ontario all got their approval within 2-3 days.

Fyi: we are in BC...

Hey, I bought an Adler rf 224 the other day (I am aware it has some mixed reviews, I just wanted a cheap 22 to shoot) I put maybe 20 rounds threw it, and it proceeded to have a bunch of issues, from not extracting the casing properly and then it started just refusing to feed a new round in. It seemed to me like the bolt wasn't coming back far enough to pickup the next round. I took it apart and found the bolt spring wasn't in its seat. I'm just curious what you guys think, to me it looks like the corner of the seat is knocked off , so there's nothing keeping the spring from going to the side. But I didn't find any debris or that chunk that I think is missing. Am I correct in guessing that the seat is broken? Or am I over thinking it? First picture is how I believe it should sit, second one was how I found it, 3rd is with the spring removed. Sorry if this sounds dumb lol, never taken a firearm apart/worked on one before.

Left: Steyr LP10E, Morini 162EI

Right: Walther GSP 500, Pardini SP (both 22lr)

The Walther is for me, the others I picked up from a retiring shooter who moved to the UK and already have buyers for (they're right handed - I'm not).

Looking to see if you know of any good gunsmiths around the GTA to get a Mossberg CBC 715T deactivated, I’d much rather hang it up than give it in for destruction.

Really excited about getting my first gun and been looking at different builds here. I had a question regarding the stowaway.

I’ve been seeing posts here and YouTube with the stowaway swapped with the 5 inch barrel. Someone here said his over all length was under 26 inches.

There was a comment that said because it’s manual action and fixed stock it would still be considered non restricted even though it’s under 26 inches.

By that logic could you take a renegade and install short stock and barrel? Being under 26 inches would it be considered non restricted as well?

I apologize for my confusion. The firearm rules are confusing.

These Yugos are packing man

Unfortunately no markings on Tins

They are 7.62x39

Anyone able, even estimate, the round count in these?

Hey everyone! A couple friends and i are considering getting into reloading so we can shoot more, i’m designing some reloading trays and i’m curious to your opinions on this tray on if there’s anything you’d personally want different that would make staying organized easier in your opinion.

Tray size is 10-1/8” x 8-3/8”

Obligatory feets for scale

Heads up, guys check your Hush Holsters SKS stock. Mine cracked from the buttstock to the grip after just a few uses and I’m still waiting on my wood replacement.

Hello everyone. I’ve been struggling to find an appropriate optic for my Ruger Scout .308. I do not like the traditional scout scope setup, it’s a bit awkward. I’ve tried an LPVO and it was just okay. Looking for opinions and advice from individuals who have used the Spectre or a Spectre clone. I’m open to other optic recommendations as well. Thanks.

Just wanted to throw out a quick review on the metal handguard and grip adapter that Neumann Metalworks just put out. Super reasonably priced, came to I think $170 all in with express shipping included. I am putting a picatinny stock on it but just figured I'd snap some photos of it now, as the stock itself arrives in another day or two.

Super solid feel, easy install, and very cheap for what you get. The handguard and grip were combined, half the price of the Midwest Industries handguard alone, which has also been discontinued I believe.

Did not receive any sort of incentive from NM to write this, just doing so because he was great to interact with, has install tutorials too on his site to make it super easy, and was a great price for all aluminum furniture for it. Super nice to have a modern ergonomic PCC setup again.

Photo doesn't have the picatinny stock installed yet as Im still waiting for it to arrive in the mail. Mag in the photo is of course empty, just stuck it in the rifle to complete the look for the photo to show off the furniture.

Very solid kit, good fitment, I love it. It is just a bit over 27" OAL even without the picatinny stock installed, so i believe it is technically legal to use even with just the pistol grip as it is over 26" OAL, someone correct me though if I am remembering wrong or misinterpreting something (I dont intend to use it anyway until I have the remainder of the stock installed).

Just saw this video that came up on my YouTube feed. Prior to 1969 I guess it was legal to hunt with a handgun/revolver. In less than 60 years so much has changed in regards to bs firearms restrictions smh.

Anyways shout out to "The Way to Native Chronicles". He makes a lot of good Canadian gun/hunting content.

Finally got my parts in from Neumann metal works (no thanks to canada post)! Super happy with quality and fitment. This is my first time owning a red dot so im itching to head out to SPFGA as soon as their ranges open back up.

This is the new compact version of the TM22 feather. Functionally it's the same as the normal one but shorter barrel. The last picture is the one I had a while ago and an example of what it can look like with the CAR-15 stock (on the way). I'll eventually get the a few mag basses too. Now that we have top charging handles, it really is the AR at home.

I haven't shot it yet, but I'll do a video on it whenever the stock arrives.

Anybody know what gun his mag would used in? Looks a lot bigger than 5.56-.223 to me.

Had a phone call with the CFO wanting to apply for one. They told me they are likely tweaking the program or ending it entirely soon, as people have been taking advantage. They told me I could still apply but they may not process it. I did anyways and they approved it very quickly.

Not sure what the overall outcome will be but if anybody was debating applying just get it done now.

Edit: The ‘taking advantage’ was that they told me people had lent out entire collections of 10-20 guns across the province to different people.