r/canadaguns 17d ago

Buy recommendations Is it a good starter setup?

So after my recent post, i choose to start with a .22lr rifle for shooting range(100-300yards),it my first gun ever and i want to know guys if this setup it decent? My total budget is lil bit under 2k$ cad. Thanks you

( i have difficulty to choose the scope,too much specs to look)

59 Upvotes

84 comments sorted by

51

u/Nice-Background890 17d ago

180$ bipod but shit ammo =(

7

u/Dream1nhell 17d ago

I dont know ammo lol

12

u/Splattah_ 17d ago

Trust me, you don't want that ammo! Try CCI blazer

9

u/sdsaf94 16d ago

Blazer will shoot worse than than Aguila in a bolt gun. SV is pretty much always better accuracy, HV for reliable semi cycling only

2

u/tonyarkles 16d ago

My RPRR loves CCI Mini-Mags more than any of the fancy stuff I’ve tried and I tried a bunch. On a good day I can print 10-round dimes at 50yd all day long with it.

3

u/sdsaf94 16d ago

Interesting, guess it depends on the gun. Rimfire is weird like that

2

u/tonyarkles 16d ago

Totally! Yeah I was honestly pretty surprised by the result. Surprised enough that I went back and repeated the experiment with whatever 2 or 3 Gucci ammo brands had given the best results and the mini-mags won the second time around too. Kept the order randomized with a few breaks so they all had a chance with a cold barrel and a warm barrel, and the results came out the same.

Sure was a shame having to spend a second afternoon putting all those rounds downrange, for science :)

1

u/Splattah_ 16d ago

Aguila was insanely dirty and bad in my gun

1

u/Pristine-Tree9380 14d ago

Until the SV blows up the gun because they're s*** quality control.

3

u/CorsicanMastiffStrip 16d ago

CCI standard shoots fantastic from bolt 22s and is pretty reasonably priced. You can go up to Eley for higher quality stuff that's better for precision shooting, but work your way up; there's no need to right off the hop.

Personally, if you're shooting benchrest anyway, I'd skip the bipod and just shoot off bags. They're cheaper and more precise anyway.

You may find 16x insufficient if you're shooting paper as spotting your hits beyond 50 yards can get tough.

Nothing wrong with the RPR, but you might be able to get a Savage B22 Precision for cheaper. Personally, I prefer the B22 to the RPR, but they're both good. The B22 Precision comes in an MDT chassis, though, which I believe is a better chassis that will also offer better accessory support.

2

u/brianwsch 17d ago

Just stick with a reputable brand of subsonic speed 22LR

6

u/CryptidWorks CryptidWorks 17d ago

CCI standard is, y'know... Standard.

1

u/TheRealTwooni 16d ago

Buy SK or Eley. If you’re going to spend that much on a .22lr setup. Run some good ammo.

1

u/Creative_Umpire_953 13d ago

Love to but can never find the good ones.. always backorder

1

u/walebrush 15d ago

Instaid of getting a bulk pack buy 5 or 6 diffrent brands and types. Try eli, norma, some of the higher end cci and some others and see what yiur gun likes best. To get your started and on the range that ammo will do but your going to want somthing better for more sereous shooting

1

u/sdsaf94 16d ago

It’s not bad for the price. 1.2 moa 10 shot groups out of a cz 457, plenty for plinking

1

u/Low-HangingFruit 16d ago

All 22s shoot different.

Some can shoot extremely well with 'bad' ammom

23

u/blueline731 17d ago

Get some nicer ammo but you won’t be disappointed with that build. Nothing is overtly top of the line but it’s all solid stuff to get started and enjoy the sport. Have fun with it brother

1

u/Dream1nhell 17d ago

Wich ine you suggest? I dont know anything about the ammo

9

u/thehuntinggearguy 3gun, Mapleseed, YouTuber, SlamFire Radio, Revolver-hater 17d ago

CCI standard velocity for ok but cheap SK Sandard Plus for fancier but quite a bit more consistent.

4

u/Domovie1 17d ago

I like Federal Automatch, but most of the CCI will do you well.

Aguila quality control is pretty bad- you get one decent box, one box that jams every third round, and one box that is nothing but squibs and slow-burns.

4

u/goodfleance 17d ago

Genuinely you should buy one box of as many different types as you can reasonably afford, then go shoot em one at a time to find out what your gun likes.

Some guns, even same make/model, vary wildly with ammo preference. I've seen expensive guns shoot very well with cheap ammo and I've seen expensive ammo that won't group for shit. Part of the fun is the sciencey bit of figuring out what you and your setup like best.

Rule 1 is have fun and shoot lots!

2

u/NecessaryRisk2622 17d ago

This has been true of my four 10/22s. Three would take anything I fed them, one only seems to take Aguila.

5

u/SecureNarwhal 17d ago

cci mini mags have always been good with me

1

u/tonyarkles 16d ago

More details elsewhere in this thread but, yeah, my RPRR loves mini-mags more than any of the fancier stuff. Which is great, since the RPRR and the 10/22 share mags and my 10/22 also likes them.

17

u/brianwsch 17d ago

Get the mdt oryx m lok bipod instead. The magpul one flexes more.

5

u/ElectronicPositive92 17d ago

I second this, I got the Magpul one and hated it, upgraded it to an Oryx and loved it way more

5

u/No_tomatoes1 17d ago

Agreed, MDT is much better

2

u/brianwsch 17d ago

The magpul is ok if you just need to have a compact bipod for plinking. But for long range shooting with intent to be accurate - the MDT is a better option.

14

u/Hot_Cheesecake_905 17d ago edited 17d ago

I rarely use my bipod and prefer to use bags to shoot instead.

Also, I've had really bad luck with Aguila Super Extra, but I'm using it in a semi-auto. See if you can get CCI Standard Velocity, which is better for precision shooting, but it's sold out in a lot of places. Standard velocity, lead round nose ammo is more accurate for precision shooting since it stays below the sound barrier.

You may want to look at a CZ 457 or T1x instead of the Ruger, as they are more popular for 22LR precision shooting. A CZ 457 with a heavy or Varmint Match barrel will carry you a long way. The CZ 457 and T1x have a lot of aftermarket parts for precision shooting too (e.g., barrels, triggers, chassis systems), which makes them great bases to build on.

For the scope, a Bushnell Match Pro ED or Arken EP5 Gen II is a good start. Get the scope in MIL.

Lastly, check out Tesro. They carry a lot of high-end precision shooting gear that you can drool over.

8

u/SkSMaN7 17d ago

I definitely agree, have a closer look at 457 or T1x.

5

u/th3rot10 17d ago

I agree with the cz over the ruger

2

u/Dream1nhell 17d ago

Cci standart are out of stock everywhere i look tho

3

u/Hot_Cheesecake_905 17d ago edited 17d ago

Yeah 😭 I’ve been hunting everywhere too.

Some other options:

Norma TAC-22 (except for its greasy feeling), Federal AutoMatch, SK’s and Eley’s cheaper options. Aguila 22 LR Standard Velocity 40 Gr LSP.

CCI Blazers and CCI Mini Mags are also good choices too, although they are faster than SV ammo.

For your rings, Vortex Sport rings will do fine on a 22lr, cheaper than the Arken rings by 30-40%.

1

u/Dream1nhell 17d ago

For the t1x and cz457 , they are like double and triple the price of ruger. My max budget for all setup it 1800-2000$

6

u/Hot_Cheesecake_905 17d ago edited 17d ago

You can get a base CZ457 which is about the same price as the Ruger, then upgrading the chassis, barrel, as you go.

CZ457 Pro Varmint Threaded is about $1,050 and is ready to go for precision shooting.

CZ 457 Varmint MTR w/ 20" barrel is $1,250 and is precision ready.

CZ457 MDT XRS 20" is double the price of the Ruger, but comes with a nice MDT stock, which still leaves you $500 for the scope. It's on sale at the store you selected the rifle above 😄

If you buy the Ruger, it's a dead end, there are much fewer upgrades for it.

2

u/SkSMaN7 17d ago

This is great advice!

3

u/chillyrabbit 16d ago

The CZ 457 is pretty good and echoing /u/Hot_Cheesecake_905's reasoning that you can always buy a chassis later.

Any aftermarket chassis will be a heck of a lot better than the RPR in stock form.

Upgradability may not matter much to you, but I do think the CZ 457 or tika T1x are vastly better platforms per dollar.

1

u/Unlikely_Link_2284 13d ago

I hate bags for bench shooting I used them for years before switching over to a bipod and absolutely enjoy shooting with it way more You can lean in and preload the rifle into the bipod and easy to adjust height. I will use the rear bag sometimes depending on the range I'm at

7

u/Hoth-Wampa 17d ago

CZ 457 and MDT Oryx Bipod

7

u/Whispersfine 17d ago

Ruger precision is a total piece of shit. Buy a cz 457 and thank me later.

4

u/DarkHeroes5 17d ago

Just wanna throw it out, i’d get the setup together and order a box or two of different .22 brands and test and see which works best then make a big time buy. 2000 rounds will take a long time in a bolt action

1

u/VanillaHighlights 16d ago

This.

I tried 10 different rounds from 4 different manufacturers until I found a 100 meter bullet that blew me away.

All I gotta say is Fuck Stingers.

6

u/DougMacRay617 17d ago

The magpul bipod is dogshit

6

u/DougMacRay617 17d ago

Its a lotta money for a setup that you will be bored of after your 5th or 6th range trip. (No hate)

4

u/Penguinbotxv 17d ago edited 17d ago

Cz 457 as a rifle, Athlon btr for scope, bag or Harris bipod and better ammo since it's 22 lr

7

u/CdnUkr on 17d ago

The Rugers have a terrible reputation amongst the Rimfire PRS community. Get a CZ457 MTR, better bipod(MDT ground pod or Oryx) and better ammo. Scope is meh but it’s not bad for a starter setup, I’d recommend a 5-25 instead if in budget.

3

u/LongRoadNorth 17d ago

As someone that owns the Ruger

I wouldn't buy it again. It's not a bad gun. But there's much better for not much more.

I'd sooner get a tikka t1x or a cz 457.

For ammo my Ruger loves Eley. Whether it be match, club or tenax.

CCI standard is meh in it past 50 years

Unless you already know moa I would suggest going with mrad as well on the optic

3

u/Captain_chutzpah 17d ago

I primarily shoot at 200 yards with a 457 with a match barrel. 

Your gonna need match grade ammo at that distance. Things like CCI and Anguilla are gonna varry up to 11 inches vertically at 200 yards. 

SK Magazine and SK Long Range Match are my gotos. SK Long range is slightly higher velocity and will be more vertically consistent. 

I can consistently hit a 4 inch steel circle at 200 yards with that. With CCI, I might make 1 in 10 shots of I'm lucky. 

CCI is great for 100 yards and closer. 

5

u/BeerGunsMusicFood 17d ago

Not bad at all but I’d go with several different brands of .22lr ammo vs going all in on 2000 Aguila. You’re going to want to figure out what your specific rifle likes. Every rifle is different.

2

u/Haunting-Goose5368 17d ago

With a new rife spend the extra on ammo at beginning. Put a few hundred rounds of CCI through it before going to the cheap stuff. Also think about ditching the bipod and instead getting more magazines,its not fun to only have 1.

2

u/Unlikely_Link_2284 17d ago

Tikka T1X UTG Rexon 360 bipod CCI Standard velocity Don't forget your going to need a scope

2

u/cannuckwoodchuck13 16d ago

Please listen to the other people saying go with a cz 457 and different bipod. 

It is a rifle with a history of proven accuracy. They are used in so many competitions for a reason.

I was shooting my 457 Pro Varmint  and reliably hitting at a 3" gong at 450' in my backyard today with crap Winchester bulk ammo. 

1

u/NumerousSetting8135 17d ago

And if you're gonna be shooting that far with a twenty two get subsonic, it doesn't hit its own shockwave, so it maintains better accuracy over distance

1

u/ExplorerEnjoyer 17d ago

Personally I’d get a Harris bipod, they’re tried and true and it’s what I’m used to now. Plus I love the look of the exposed springs.

I’m not familiar with Arken but I’d recommend Vortex for a good budget optic that has a fantastic warranty

1

u/mxcrazy1998 17d ago

There’s allot of 22 magnum scopes (different caliber than 22LR) and they work so freaking good for half the price.

Entirely your call but this is a good set up for sure. 22 shooting as an intro to marksmanship is a great choice

1

u/Top_Importance6216 17d ago

for .22 that bipod is fine but anything with more kick is gonna make you wish you invested.

1

u/Piqued-Larry 17d ago

Once you shoot a box of Aguila, you will forever recognise the brand by smell.

You'll know when someone else is shooting it in a reasonable distance.

1

u/Dependent_Account603 16d ago

Buy a bunch of different ammo find what your gun likes then buy a lot of it

1

u/cowontag11 16d ago

Owned a RPR at one time. Chassis and bolt are sloppy. It'll shoot anything but as others have suggested CCI standard is probably your best bet. S&B have their Canadian "match" (it's far from it) and it'll work fine.
Buy a bag(s) and ditch the bipod, it's another thing to learn.
It hasn't the best fit so get someone experienced to show you how to align and torque it down correctly.
Personally I'd save up and skip the RPR and again as others have suggested buy a CZ457. If you want that skeletonize chassis look get a real metal one and buy a Tikka T1X

1

u/Jarrizar 16d ago

Honestly unless you need 22lr for some reason, you should get 17 HMR instead. Then later grab a TM22 Pro 16!

For scope you should definitely grab a Discoveryopt ED GENII or the XED

1

u/danukrr 16d ago

I would get the same gun but chambered in 17 hmr instead of 22LR. My buddy’s got one and it’s accuracy is great

1

u/Daedalus-N7 16d ago edited 16d ago

Honestly I would suggest you spend a few extra hundred and pick up a bagara b14r. Over the Ruger precision rimfire. It will leave you a lot more room to upgrade. I started out with the precision rimfire to get into the rimfire sport. and quickly started to outshoot it. The b14r is built off a rem 700 action. So basically all REM 700 aftermarket chassis like such from MDT fit it. Or even a CZ457 or tikka T1x

Also for the bipod I would suggest the MDT ground pod. It's $280 verse $180. But IMO is a much nicer bipod. And you can get it in ARCA

As for ammo. Every rimfire rifle is different. What you're going to have to do is buy a bunch of the higher end 22LR ammos and just group them all to see which one groups better in your specific gun. Also the cheapest ammo why would shoot out of a bolt rimfire is CCI standard(good for practice). Once you find what brand your gun likes then you can start experimenting with ammo batches

Lastly whatever scope you land on get one in MRAD not MOA. Practically everybody is running MRAD now. So it will be a lot easier to exchange dope

1

u/Grade_Soft 16d ago

Magpul looks awesome but apparently not that great

1

u/walebrush 15d ago

After looking. Ar some reviews I would highly recomend the MDT ORYX bypod over the magpull. Allot of the reviews I read cited stability and build quality problems espetially compared to the oryx. I ended up buying an oryx and I love it

1

u/AdmirableKey7556 14d ago

Get a 100$ single shot shotgun and fuk load of ammo. You gonna have some great time for under 200$

1

u/Pristine-Tree9380 14d ago

I'd stay away from the Ruger. If you have a problem with it and you have to send it into their authorized service center regardless if you pay for it or not. They take months to even give you a quote. Well over a year to actually do any kind of repair. Warranty or not. Better off with the CZ 457 in my opinion they're far more accurate as well.

1

u/bot6six 14d ago

One of my buddies picked up a new 457 Varmint for $850 shipped back in November last year, found a gun store that was listing them on gunpost and I'm guessing they did a cash deal. I can't comment on the rest of your setup but there's definitely better deals out there

1

u/jeilb 13d ago

Get a Harris bipod, trust.

1

u/Creative_Umpire_953 13d ago

Went with T1x and put it in a GRS Fenris...really happy with the results.

1

u/Mysterious_Sleep7443 17d ago

Absolutely that is a great set up!

Thank you for not being cheap and buying Turkish Garbage

Some CCI Blazer or Standard would be a better choice for ammo for starting out

Then you can move into aome match grade stuff later on

Beautiful set up OP I have the same rifle and love it !

1

u/BlackMaple21 17d ago

Looks good to me, you will have a lot of fun

1

u/Fickle_Ice_7584 17d ago

You can definitely save some money on rings, I swear these things are made in the same factory as vortex rings, same quality for a fraction of the price. They have held up well with my 44 mag so 22lr will be a non issue

https://www.amazon.ca/dp/B0CX1R6PT2/ref=twister_B0FJFG9CTK?th=1

0

u/LuckNo2351 17d ago

rpr is a very good package. try some subsonic ammo like cci quite.

0

u/epnk420 17d ago

I have a Ruger precision rimfire it’s not too shabby, look at Leupold rimfire scopes for the price they’re really good

0

u/Current-Speed4096 17d ago

scope is a bit overkill, but im assuming you wanna up the calibre in future?

-3

u/NumerousSetting8135 17d ago

Sks is a better starter setup

1

u/Dream1nhell 14d ago

Prob gonna be banned soon?

1

u/NumerousSetting8135 14d ago

They won't lol there's too many of them 🤣