Latest finished project. Matching set of bolt action Blackcreek Lab 7.62’s in an FDE + Mil spec OD green.

I really hope the PM decides to take this for a spin at the range and decides the Secretary of State for Nature should stick to the Nature lane.

I doubt anything will come from this but it sure would be incredible if all it took was this gifted revolver to change the course of gun legislation in this country.

I made a grip that holds glock mags, a bigger cocking knob and a stock that holds the barrel and nut when transporting it. Does anyone have any other ideas? I’m thinking a fore-grip will be next.

Having so much fun with this rifle. It’s so light and so much fun to shoot.

Hey everyone. Just got a RIA imports TM22, brought it out today for its first real target shooting. Put around 200 rounds through it and at the end, the magazine catch button popped out. It seems the threads on it are stripped so the catch button screw won’t thread into it. Has anyone else had this problem? Or know where to get metal one?

Am I one of you now? Did I do it right?

Super happy to get my hands on a French Tickler, really looking forward to trying it out.

Shooting at some steel 8x8 at 600 in preparation for my upcoming LEH goat draw. Will be keeping shots under 400 for the hunt but want to get comfortable with distance.

Lots to learn shooting this far. So many variables. Wind has been crazy the last little bit so thats been a fun learning curve

Tikka t3x Ace game chambered in 6.5 creed with a area 419 hellfire match muzzle brake. MDT GRND bipod.

Yes I will be hauling this up the mountain. No I don't want a ultralite rifle 😅

Vaguely 7moa drop to the target 😅...

And yes, I use moa and not mils 🤷‍♂️.

Apparently that is sacrilegious to other prs rimfire shooters 🫠:

https://youtu.be/L4oaHdAfFr0?si=GQ5-8EMX5DPBI7Yu

Someone (in CGN) took a busted Webley MKII frame and MKVI cylinder and barrel assembly and made this unholy Webley MKII***. It has MKVI Cylinder and barrel assembly so it can withstand nitro-based ammo (or at the very least a cordite alternative) and since frame is the gun so it is fully legal and antique. To top it all, they got new grip made locally.

They also made speed loaders using .410 speed loaders with central post removed.

I also wish to do the same and have some doubts. Can someone with knowledge in antique restoration help me with following questions?

1. They mentioned they used part of MKVI cylinder cam system. Can someone elucidate what it will amount to? I believe they had to put the cam that rotates cylinder from MKVI to MKII.

2. They mentioned they had to cut new forcing cone and CNC a new ratchet star. Why will a new forcing cone be required? I thought forcing cones forces bullet from cylinder into barrel. That should be a part of barrel assembly, right?

3. Also CNC a new ratchet star. Thats for timing and extraction, right? so they had to make a new one. That sounds a bit worrying. Because it controls timing.. Has anyone here done something similar and what was your experience?

I tried communicating with them but they are maintaining radio silence. Perhaps for a good reason.

I don’t know how I stumbled upon these but I did. It seems sketchy I’m not sure it’s a good idea but it could solve an issue I’m having with my 10” Ege Levar12s.
So out of my 18” barrel 12 guage using a rifled choke tube I have great accuracy with repurposed target loads with hand made Lee 7/8 slugs but when I toss them in my 10.5 Ege with the same rifled choke it’s all over the map.
My best guess is with the shorter barrel it’s not getting a good enough burn and the blast is sending the slug tumbling? I’m not a ballistics expert. It goes in it goes boom it comes out. What ever else happens in between or after it’s beyond me. So this leads to my 2 questions has anyone tried one? And from what I can tell Lockhart tactical is a legitimate company I can trust?

If I ever say "no", give me a shake...

List of guns :

Savage 64, sucks ass

Winchester model 670

1955 russian SKS

Smith and wesson model 916

Stevens model 58

Cooey model 60

1942 Lee enfield mk1 no4

1943 Carcano M91 cavalry

Unpictured Squires bingham model 14

Lots of Oryx owners out there so here's my take on building and maxing-out MDT's budget friendly chassis.

Usage: Ranger/trainer rifle

Bergara B14 in .243 WIN (Stoke 1:10 20")

Bergara ST1 brake 5/8x24 (.30 cal)

Bergara 10rd aics mag (waiting for MDT steel mags)

Oryx chassis (Grey)

Oryx arca rail (milled for spigot link/extension)

Oryx mlok side panels (Grey)

Oryx buttstock adjustment knobs (x4)

MDT vertical grip elite (notched)

MDT elite bag rider (waiting for 3° angled)

MDT vertical adjustment buttpad

MDT 20 moa pic rail

MDT elite cheek piece (waiting MDT low profile)

Triggertech Special R700 Flat shoe (Set at 1.4lbs)

Discovery ED PRS gen 2 4-20x52

UTG TL 360° bipod 7-9" (waiting for MDT GRND)

Sphur 34mm scope mount

Wayllan MW5 mlok weights (waiting for MDT set)

Wayllan QD picatinny to arca head adapter

Custom brass internal weight (tapped and fastened)

Custom spigot base v1 (secured via arca milled slot)

Custom clamp on tuner (testing stage)

Custom adjustable bag rider plus grip connector bar v1. Milled and hand finished from 2"x1"x12" 6061 aluminum bar stock and two turned 9.5mm x 65mm 6061 aluminum pillars.

Total weight: 18.8lbs (unloaded)

Point of balance is half inch front of Barricade stop.

Sub MOA with norma whitetail 100gr 5 shot at 100yrds.

Load development in progress.

Work in progress:

Barricade stop extension

Spigot body (2 mlok slots)

NV Bridge/hood (picatinny)

Enclosed forend (picatinny/mlok)

None of these upgrades altered the main body of the chassis. The screws used were surplus hardwares that came with the added MDT accessories. (@MDT Josh 😉)

Open to answer any related questions.

Anyone know how to remove the crossbolt safety on the heritage arms mare's leg? I've seen that for other similar firearms you push it in half way then rotate. I tried that on this thing and it doesn't seem to work.

.308 with vortex crossfire HD 6-18 and piggy backed swampfox kraken.

I have a left shoulder injury from playing adult football as offensive tackle, but still managed to pull off this fully bolt action run with S&B 150gr sp loadings. I had to admin rim lock at one point rapidly before closing the bolt since I noticed the rims overlapping wrong way before slamming home the bolt.

Good afternoon,

I am interested in getting my black badge and becoming an ISPC member. However, with the current handgun bans im unsure of the organization has been affected due to the freeze on handguns. I can’t find any info about using shotguns in the organization within Ontario.

Is it still possible to become a member? I have my PAL and RPAL, but I don’t own a handgun. I do own a shotgun.

Just a showcase today of my antique MK1 Webley from 1890-1892, using light smokeless handloads.

Load recipe is: 230g LRN, 3.4-3.6g of Win 231, CCI large pistol primers, using 45 auto rim or 45ACP cases (45 auto rim in this case)

Alternatively, I use the exact same load with 200g LSWC bullets as well, and they work just fine also.

So after my recent post, i choose to start with a .22lr rifle for shooting range(100-300yards),it my first gun ever and i want to know guys if this setup it decent? My total budget is lil bit under 2k$ cad. Thanks you

( i have difficulty to choose the scope,too much specs to look)

Not very practical. I would call it more of a collectors piece lol.

Only spare optic I had was the Vortex venom 1-6.

I was hitting a 10 inch metal target at 100 yards…

Caracal USA - CMP9 9mm PCC

Although it is called a pistol in the video, Caracal produces a semi-auto only variant of their CMP9 firearm. Could this be submitted as a rifle with a stock for an FRT entry, either with an existing restricted barrel, or with an extended NR barrel? The design pre-dates C21. Or is the fact there is a military variant make this too big a risk? If it could be submitted, could stocks of MP5-esque mags and 9 mm barrels from Sterling's banned R9 be used to make these? Thanks!

Where can I find a GSG 15 OR 16 110 round rotary drum mag? Can't find in stores anymore. Got a TM22 and an adapter to attach the drum mag to a regular mag. Please let me know people

Could the ep45 come to canadian markets? Especially since after the brigade and carmel are entering? It looks like it could surpass it takes glock mags and shoots .45

Felt like testing out different .22LR ammunition and this is what I came out with. Every gun is different but what has been your most consistent .22LR ammunition?