So I found a really good deal on a gun that Sporteque has listed up on their site. I would have to do shipping since I'm in Ontario and their store is in Quebec.

I'm just concerned cuz I looked at their Google reviews online and they're averaging at just 4/5 stars currently. There's quite a few negative reviews.

I'm wondering if anyone has dealt with this retailer recently. Thanks.

So i got the remington 597 adapter for my 10/22 and im kinda disappointed. I have to hold the bolt open when i insert the magazine or they just fall out and even so if you manipulate the gun aggressively the magazine still work themselves out. I put a strip of electrical tape on the front face of the magazines and that helped a bit but im just wondering if this is just a normal experience or i got a defective adapter? Dont flame me for the barrel length i ran out of money with the chassis. Short barrel coming soon.

First of all I was recently looking for a .22 in order to have fun and teach the gf the basics. I happened to take the wrong highway exit and stopped at a gun store in the area to avoid the rush hour and see what .22s they had. (Common mistake happens to us all).

​

Came across this "gem" Stoeger m3500 (some hunting edition) for a decent price and decided a 12ga should be added before the .22 because why not and I really want to get into turkey hunting.

​

Question about gun lockers. Since I believe 300$ (loose guestimate) in material would be a better locker than the cheapo canadian tire one. I am making my own until I move and go for an actual safe. I would like to add a humidity absorbing thing/gizmo to it. Is the any recommendations or ideas? It should be fairly sealed but just an extra precaution.

​

Thank you, the .22 should be next or the .300 win mag or the sks. Yeah

Hey fellow gun owners,

I’m looking for my first shotgun and I’m leaning towards an over-under. I’ll be using it for clay bashing.

Since I’m left-handed, I’ve found that over-unders are a great start for me, rather than semi-autos.

I don’t hunt, so this will be purely for clay shooting, target practice at the range, and other activities.

I’d love to know your recommendations for my first over-under. Ideally, I’m looking to spend between $1,000 and $1,500, either used or new.

I went to my closest Ramakko’s and saw a used Browning Citori with a 30-inch barrel. It’s in pretty good condition and they’re selling it for around $1,500 CAD plus taxes.

What do you think? Is that a good price? Also, when can I find private ads so I can compare different options?

Since this is my first gun, I don’t want to go over budget. Maybe I’ll stick with semi-autos or a different gauge in the future, but I’d love to hear your thoughts.

Thanks!

This is a new canadian gun ad store that will be launching this year, good alternative to existing ones because its protected by escrow. You don’t have to rely on good faith of the seller anymore when sending money.

bornitemarket.ca

I've been really wanting to get into long range precision shooting recently but have only been able to find a few ways to shoot over 600 meters. Either at CFB Borden up to 1k yards or MilCun up to 600m both through the Ontario Rifle Association.

I'm wondering if it might be possible to drive down to Michigan or New York or other nearby states and utilize their ranges, does anyone have experience doing this? I'm quite new to shooting and not sure what the laws are like in terms of taking firearms to and from the states.

Also, I've seen some people saying to use crown land but I don't think I'd feel comfortable shooting off range.

Would love to hear any ideas anyone has for long range shooting options in or near Ontario, I'm completely fine with driving 3+ hours.

Citadel levtac 92 in 357 magnum I put a vortex crossfire red dot on it with a magpul mvg foregrip and a custom wrap on the lever and fore grip

Finally found some time to try out the new RDS on my P320. Brought all the pistols along for it.

Here is my ST-22 build, made from spare parts from some other guns I had lying around in the safe. It’s a great pest control option and it’s a lot lighter than my usual CZ457.

Parts list:

ST-22 receiver
Spectre G3 chassis
Ruger bx trigger
Factory Ruger bolt
TCR22 16” barrel
Magpul MOE K2 grip
Magpul AFG
BCM Stock MOD 2 SOPMOD
And a cheap sight mark scope and scope mount I can’t remember the names of.

Where to get variety if the SKS stock?, I wanted to check custom stocks like Archangel but can't find the black version.

CGN Member Greentips was one of if not the first person in Canada to get a Makasi, as he imported the Restricted version from IRunGuns. In his posting his initial result soft of firing the Makasi on CGN, he noted a discrepancy between the captions on the pictures of the gas system in the manual, and the actual behaviour of the rifle. I have phoned Makasi and confirmed the captions are indeed incorrect, and that they will be correcting the manul. For Your Information, from both Greentips and Brigade Firearms themselves, the gas system is in unsuppressed mode when the adjustment slot is in the vertical orientation, perpendicular to the ground. The suppressed setting has the adjustment slot set in a horizontal orientation, parallel to the ground. I will attach an edited, corrected screenshot below. Thanks!

I want to build a blackpowder firearm. I got the stock, flintlock and trigger without my pal. I buy my parts off a auction site which says I need pal for any firearm barrel. Can I just get a barrel machined for this or should I just get my pal

I'm applying for my PAL. Just got proper photos taken. Now I am reading that I need to affix a sticker to the back of the photo with my name, my guarantor's name, and their signature. Do I seriously need to get a sticker made and then stick in on the back? Or can I just glue/tape it?

Label Instructions

1. Cut the photo to fit the size requirements.
2. Print your name and your guarantor's name on the sticker.
3. Have your guarantor sign it and complete the Photo Guarantor section of your application.
4. Affix the sticker to the back of your photo.
5. Enclose the photograph with your application.

Hey people, I have a marlin 89C .22 inherited from a passed away relative that I really would like to keep.

I’m just wondering since I know nothing about gunsmithing and repair, it doesn’t eject spend casings. Would it even be worth taking to a gunsmith?

While I wait for my Makasi MK15 to arrive, the Akdas Alcor has been keeping me busy at the range.

This rifle has now seen over 4,000 rounds, and it just keeps running. No broken parts, no major failures, and no signs of giving up. It’s been a reliable and fun rifle to shoot every time I hit the range.

Disclaimer:

I do not support Colt Canada and what they are doing, however this is not a political circlejerk, so please keep that shit in the Megathread, because my posts are not grounds for political discussion unless it is DIRECTLY related to the firearms.

Anyways with that out of the way.

Howdy Folks!

The Texan is back with yet ANOTHER Gun Appreciation Post, where today, we got something that used to be around in Canada before being listed as prohibited.

The one and only!

Colt 9mm

Also includes AR9’s which is the main topic of this thread. So if you had an AR9, chances are that you could have used either Colt mags or Glock mags in yours depending on how you had it set up.

These also make perfect hiking guns and truck guns when you need to be on patrol.

Anyways that’s today’s post.

Enjoy!

They have me two dates for turning in my guns, neither of which works (I won't be in town). Like wtf?

Want to learn or brush up on the fundamentals of rifle marksmanship?

​

This is a terrific way for new shooters to get some quality instructions and for experienced shooters to improve their skills

​

Project Mapleseed is offering one day clinics in NB and NS again this summer and there are still some spots available.

​

Fredericton (Sunbury range) June 27

​

Woodstock July 26 has one spot left

​

Nova Scotia's Cape Nova Rifle and Pistol club is hosting two events August 22,23 at the Queensville DNR range.

​

Check out the Project Mapleseed website for more information and the links to the tickets on the events page.

​

https://mapleseedrifleman.com/

So I'm trying to find a cartridge interrupter for my 590a1 because mine is bent. I've fixed it for now but does anyone have any leads on extra parts here in Canada? I've contacted wolverine supplies but they don't have any in stock.

Just saw this new derya semi on sfrc, anyone got one?

Looking for a good spot to target shoot on in Squamish bc. Are there any good spots to check out that are within a 30-45 min drive from the area ?