Anyone got a good takedown video for it?

Seems the newer model’s magazine spring is locked in place and the instructions are for the old model. I can’t for the life of me figure out how to get the magazine spring off.

Instructions and actual firearm in photos for reference.

Also the pins above the trigger group are impossible to remove I’ve taken a punch and a hammer to them and they won’t budge.

EDIT:

Ok I figured out the issue.

The instructions say to twist and pull out the charging handle. On the gen2, the charging handle comes out with a straight pull when it’s moved back about halfway. Mine was stuck (like almost everything on this gun).

The actual bolt and firing pin hold together the action spring. You can’t disassemble it fully without removing the bolt and firing pin.

I put the gun into pump mode, and used the handguard to pull the bolt back about half way. Then used a pair of pliers to yank out the charging handle.

At this point I was able to follow the remaining steps as normal.

I was unable to remove the trigger group because the rear pin holding it in is completely stuck, I tried a punch and hammer to get it out with no luck. I think I need a press or something to get it loose. Already scratched the shit out of the side of the gun with the hammer and punch method.

Hey everyone, first off not my picture just one off the internet.

Picked up a gunsite scout and have been considering switching from the front mounted scout scope to a traditional mounted lpvo and full rail. In my opinion an lpvo is just a modern evolution of the scout concept and since the ruger takes box mags the whole feeding the gun with stripper clips thing is moot.

A big reason I’m even considering this route is so I can run a top mounted red dot and still fire with NVG’s on.

Anyone switch over their scout or just have general info on any upgrades or work you did to yours?

Hi everyone,

I’m new to firearms. I recently got my license and went to a range to try out a few different guns. I’d like my first firearm to be a Mossberg 590A1 (the basic model; as a white belt in firearms I probably am not ready for upgrades like Magpul furniture, etc.).

I’m going to buy online because the closest local shops are 5–6 hours away, and none of them have the 590A1. There is a reddit post that lists all major gun shops in Canada. I've narrowed my options down to these: RDSC, GoTenda, Firearms Outlet Canada, G4C, and Reliable Guns. My requirements are as follows: Excellent customer service and communication (esp after sale, how they handle problems and warranty issues), integrity (won't send me a returned/used gun), good packaging and safe shipping.

Most of them offer free shipping since the price is over $500. RDSC charges around $20 for shipping, but I don’t mind paying a little extra if they have a better reputation for customer service and overall reliability. The 590A1's price also varies by roughly $10–$30 between these retailers, but that is okay.

Please share your thoughts as to where I should buy from. Thank you!

This is my build I am hoping to compete with locally next year if my spine allows it. It is a CZ457 MDT XRS combo with a MDT 20MOA rail and vortex precision rings. The scope is a vortex optics venom 5-25x56 FFP in MRAD. I put an Arca rail segment on the bottom with an mlok section exposed. I have three of the MDT mlok weights on the forend and will eventually be getting the XRS internal weight as well. The bipod is an MDT GRND-POD bipod. I have only shot it a few times at 50 yards with RWS Club match but it shoots spectacularly. Should be able to get some wicked testing done whether or not to stick with RWS or to go with Eley or something in the SK range if I can ever find it.

Let me know what you guys think.

So since we know a bit about the delays on the Makasi MK15 with its QC issues, has anyone who went to Taccom or anyone who talks with North Sylva have any information on what's happening with the Caramel release date?I know my LGS said they were expecting them to arrive late August. But they have heard nothing in regards to any updates. Seems like the Redditors here have all the inside scoops

A little bit sour’d on SIG after my latest experience (check last post if interested) however I’m still looking to get a .308

What’s everyone’s thoughts on the MRA Maverick? Is MRA’s 1MOA accuracy true?

ASCEND ARMORY HANDSTOP

shooting semiautomatics at the range is like drinking beer and smoking cigarettes,

shooting long range with a proper bolt action is like like drinking scotch and smoking cigars,

lets have a debate!

TR45 Micro just came in today, double action pull is heavy, probably needs to be broken in. Took off the cheek riser and the flip up sights that it came with.

It seems pretty solid, bought some 45 colt and 410 to give it a go soon. Hopefully the blow back of gasses isn’t too bad, I’ll remove the blast shield on the right side if it seems like it’s a bit much after a few rounds.

Imo I think it’d look so much better with a fixed z-style stock but this is cool too.

I really want to ride something now.

Pretty much the title. I am in a different province. I tried calling them a few times but it keeps going to voicemail and I haven’t received any responses to emails.

2 tommy kits and bent firing pin later...

Feyachi 1200 light kit with goon tape wrap
Crusader conversion kit
Vortex magnifier with red dot.
Magpul bipod

Any recommendations folks?

Riverside 215(I think) made by Stevens some point between 1914 & 1930.

yes the barrels are chromed, apparently it was used to shoot rats in a barn…all hail the rat blaster, a scattergat like this deserves to be in Loydminster to keep wild rose country free of vermin. I plan to restore the stock and make it pretty again somehow.

Thank you for coming to my ted talk.

Semi Auto (R9C coming in Nov-Dec)

• RCMP accepts that R9 is not a variant of AR-15 (DUH!)
• BUT because SRI shipped R9 recievers to US for use in machine pistols, RCMP thinks it is ... a pistol... Go figure! LOL!
• New variant of original R9 called R9C is coming in Nov-Dec, which is incompatible with whatever they ship in US. It will get new FRT.
• People having R9 Prohib will be able to ship their gun to SRI (cost borne by owners) to convert to new R9C which will be NR.

Lever Action

• New lever action coming in the same time frame in 9mm
• Will have barrel of 10inch and 14inch
• Glock Mag
• Will allow customization
• Price should be less than 1500 CDN (Ouch!)
• Later they will add 10 mm and 45ACP, already shipping in USA
• They want to add a proprietary mag later. Becuase I guess Glock ones will be restricted to 10. So we may get a level action with detachable mag having more than 10 capacity.

A little over 1 year with PAL. 1st pic: Type 38 Arisaka, Armas Garbi SxS shotgun, Brazilian M954 Mauser, Type 56 "French Tickler SKS, Winchester Wildcat, 1849 Colt Pocket Revolver, Union Arms Co Pocket Revolver, Remington New Model Pocket Revolver. 2nd pic : Henry H001

Was just browsing Kodiaks site out of curiosity and saw theyre selling lever actions now? Not sure if this is a new thing for them or not. The wood on them actually looks beautiful. Anyone ever seen or handled one in person?

Looking for a pistol‑grip chassis for my T3x CTR .223. I shoot only from a bench at max 600m and want to keep using CTR mags. Also any other accessory recommendations?

Hi all. I'm going to turn 18 and upgrade from my minors pal to a full pal in a couple months here, and I'm starting to think about which guns I am going to buy. I have a budget of $1500 and am looking to get the following guns for the following reasons:

-Centerfire Rifle (Deer/Elk hunting, target shooting) Budgeting about ~$700 (With scope)

-Shotgun (Upland game bird hunting, trap/skeet) Budgeting about ~$500

-.22 (Small game and plinking) Budgeting about ~$300

As of now, I am considering the following

-Ruger American Gen 1/Glenfield Model A paired with a Vortex Triumph HD 3-9x40mm

-Used Benelli Nova or new Winchester SXP or Mossberg 500

-10/22?

I'm curious what recommendations you all have to offer. Even if you just had a budget of $1500 and throw my considerations out the window, what would you get? Open to any and all discussion, thanks!

Purchased a wood version of the cz512 in 22 magnum, luckily found a tacticool ATI kit for sale and threw it all together!

This thing is quite accurate with the right ammo, nice little cheap plinker. Can’t go wrong with CZ

Sorry for not including any feet

Approximately ~150 rounds so far, one stovepipe.

I picked up a LED flex lamp with a 3"(?) magnifier built in. I'm thinking of clamping it on the shelf above my work surface. Any other ideas?

Hey, mods please help me out. Are we allowed to call out scalpers by (user) name here? Specifically talking about gunpost.

Parasites should be shamed publicly in my opinion.

I use gunpost a lot. Some of the posts and prices I see are friggin wild.

Can we as a community do something about this?

So it looks like there’s a few new 9mm options coming to Canada. The Schmiesser psr-9 pump action and sterling rc-9 in semi auto and the sterling rl-9 lever action. I’m pretty excited. unsure if I’ll go with the psr-9 or the rc-9 what are your thoughts? It’s also pretty cool what sterling says they are gonna do for all the guys who have the now prohib r9!

Hey all, wondering if gunpost is still the go to place to offload ammo and arms.

I don't really shoot anymore and I've got boxes of new ammo and other arms I wanted to get rid of. From what I see gunpost is still the best but checking if there are any other places to consider?

this is for a bison hunt in Saskatoon and down the line moose and elk I have been wanting to know how is the action feel reliability etc i love the case hardened look but do not want to overly pamper it just basic maintenance like oil etc