This ammo is probably made by diddy iykyk😅✌🏽😂

22LR Savage A22 in a Boyd's At One stock. I host a few family range days every year and wanted something that was adjustable so that new shooters could get comfortable behind a scope and not be subjected to my fit on a rifle.

I've just installed a Weaver 605 rail so that we can get the scope a little further back. I've put my spare 3-9x32 AO scope on it and I think it looks low and lean. Not bad.

(BTW, it's made in Ontario. Let's support Canadian companies, guys and gals.)

597 magazine split opening in half while loading 😫

Although they have been banned, they still deserve our love and passion! They don't deserve only collecting dust in the safe for ever.

Disclaimer: All firearms in the video have been pre checked, unloaded and with trigger locks on. The video was shot in a perfectly controlled safe environment. The copyright of the music and the first 9 seconds footage belong to Lari Basilio.

Guess which is which?

1944 Izhevsk Mosin Nagant with modern production NPZ PU 3.5x optic.
TM22-12 Pro with a bunch of 3D printed parts and a custom 20rnd magazine.

I’ve heard cci blazer ammo has been good, but I was wondering if there was any other that are similar

Hey all!

I recently purchased a Benelli M4. I’ve had it out twice now and put maybe 250 rounds of buckshot and slugs through it as well as some target loads. I oiled it before I put it together the first time. When taking it apart now to re apply some oil, I noticed this rust here. I was just wondering if this is a problem and something can be done about it or if this is something that just happens. I am rather new to the hobby so any and all advice would be greatly appreciated.

Finished putting my 10/22 together.

12.5 bull barrel

Sb22 chassis

Od green magpul

Vortex sparc 2

Overall length is 28inches

Love this little takedown 10/22 chassis - my new 16” carbon Ruger takedown should be here sometime next week, still debating on what optic I want to mount.

Will post feet when build is finished 🫡

As mentioned in my previous post I got out an hour ago to shoot the sulun straight out the box. A few mishaps and issues considering its a turk gun, 1: Failure to feed/dual feed, my guess is that this was done with birdshot since I dont have anything else to use at the moment besides that, will get heavier loads Friday. 2: slight scraping with the pump action, just some paint getting scratched after slight use, doesn't affect the action just cosmetic. Feels like it may be actually decent for a Turkish gun when broken in, will cycle fine after used for a few hundred rounds is a guess (only have one other Turkish shotgun which is a panzer m4, this is better then that out the box) the video shows the 1 failure i had through two boxes of birdshot, will test tomorrow with semi more since I shot it once with semi

Looking to get one but accumounts PUs are way over priced looking for other recommendations

I hate the guys who scalp and markup by $1000 as much the next guy, but it’s so disappointing to see this labelled “sold” after being posted same day. Some people just have different levels of disposable income.

For the dumb automated reddit rule: this is not a sale, offer or advertisement of any item, only a screenshot of a website.

Got it today, not sure how to take down the stock (might just be very tight) but included my feet for yall

Picked up this great example of a Valmet M78 in .308 a couple of weeks ago from GunPost. If you’re familiar with it, you’d know it was developed by Valmet as a possible LMG for the Finnish army. It didn’t get adopted but they still produced it for the commercial market. A semi-auto with a 5 round magazine doesn’t make for a great LMG so I figured I’d see if I could turn it into a DMR without having to make any permanent modifications to the rifle. It performed quite well at the range today with the cheapest ammo I could find locally (4.5” groups at 200 meters). I was just happy that it held a consistent zero! Here’s the build list:

Valmet M78 in .308

-AK Master Mount side rail (AKM Pattern)

-RS Regulate AK-303M lower mount w/ full rail upper

-MDT Premier low scope rings

-Primary Arms SLX 1-6x

-Valman AK2.0 Buffer tube adapter

-Magpul MOE PR Carbine stock (wanted something that was lightweight but still retained the silhouette of the club foot wood stock)

1; has anyone been able to get on these in Canada? My
Local dealer said they’re importer doesn’t list it. I figured I’d ask around before trying to get them to special order it

2; Would shipping this within the USA and going to pick it up myself be an option? I know crossing the border with fire arm components can get complicated. I know it’s just a harmless piece of rubber and plastic but I’d like to avoid any hassle if possible.

Thanks!

First Turkish, it was recommended by few guys doing action shooting so I decided to take the risk

Had safety issue in the very first day but LGS made it right

Significant heavier than my 10/22. So far, I have seen few flaws in its design but tbh, it is expected

Aluminum receivers, aluminum handguard with M-Lok, heavy barrel with threaded muzzle, accept some AR15’s accessories like grips, stock; 25-rnd magazine which could fit my Ferro Concept’s KTS placard with good tension

It is a good coping gun.

I did toonie mod, added few Tommy Enterprise’s cosmetic part, basic vertical grip with combo dot + mag from Holosun. Cannot wait to hit the range this weekend

Update: sighted in my gun today. Cycle CCI Minimag 40gr very well. No jam or hickup. It even cycles cheap bulk Winchester white box 36gr 555rnd which gave my 10/22 hard time. I shot nearly 300 today no issue at all except the inner coin of the toonie I placed between buttstock tube and rubber disk was loose. Now I have a $2 washer

I live in downtown Toronto and often use the subway and busses to get to the ranges.

I'm currently using a Vevor gun hardcase to carry my SKS. I don't have any stickers or labels on it that screams "there's a gun inside", but I read that a gun case alone is enough to cause panic or get stopped by the police, and that you need to cover the gun case (which is impossible because the case is already HUGE).

Is this a real risk? I'm getting a ton of conflicting and unclear info online.

Long time coming. Been chasing an M10 for a while and when I saw one pop up online I had to — 27” .338 Lapua, Coyote, folding. Turns out they only get about three a year, this one was ordered in 2024, and every other shop I called said special orders on these are paused and were a 1–2 year wait even before that. So when they said “we have one,” I didn’t think about it very long.

Came with the rifle, one mag, manual and the Sako hard case. That’s it.

I already run a TRG-42, everything in the safe is on Nightforce rings and ATACR’s and I’ve moved all my bipods to ARCA (MDT Ckye-Pod), so I’m leaning toward maybe an S&B or Tangent Theta and a short M-LOK ARCA rail up front.

For the guys who actually own one:
What scope did you end up putting on?
Ckye-Pod HD, Accu-Tac, Atlas?
Spare mags — anyone found them anywhere other than Tenda? Did you go down the change-kit road for .308/6.5 training?
Anything you wish you’d known before the first 100 rounds? Break-in, brake, cleaning, whatever.

Also open to any accessory I’m not thinking of. Ammo suggestions welcome too — I’ll be handloading eventually but want a factory load to zero and chrono with.

I recently had a discussion with a fellow PAL holder on some of the new exciting rifles that are coming into the country. To summarize his viewpoint in short, it was that no one needed such firearms as they have no use in hunting. It was reminiscent of the democrat argument of “just buy a shotgun”.

In my experience, the younger generation of enthusiasts view firearms in an opposite light of fudds, where firearms are a means of self defense from tyranny in form of government and intruders.

This got me thinking, how responsible are fudds for our current dire circumstances? I feel that most of us had to become political activists in recent years due to necessity whereas fudds choose to be politically complacent or have been convinced that less freedoms are better.

In some part I feel that we as a community actually deserve the hand that has been dealt. Even on our firearm based sub, I see some comments being massively upvoted that promote limiting our freedoms as Canadians or cope comments because it would mean we are superior to the US.

Would it have always turned out like this?

Hey there, new shooter just getting into things and having a lot of fun. Here is my collection:

1. Ruger 10/22 with Viridian Eon 3-9x40

2. Beretta 1301 in 12g

3. Bergera B-14 Sierra in 30.06

4. Tikka T3x Lite in 308 (unfired)

I know I have a lot to learn but I have been enjoying my time at the range. Moving the Ruger's scope to the Bergera and I will get a proper scope for it when the time comes. The Tikka Lite I am thinking of selling to get a CTR but the store was out when I got there.

I did have the top charging handle, but let's say it did not survive in one piece. I'll have a video on that soon. But the CAR-15(ish) looks better with the short barrel compared to the original feather.

Also the MadDog M733/M723 airsoft stock fits on the tube perfectly, so its still fully adjustable.

Just thought it was neat to see side by side. The bullpup reminds me of a star wars prop or something. As soon as I saw it I wanted one.