Jeepers, I wish I learned this before I spent an hour of anger management training with my M-LOK flashlight, LOL

Full video explainer is here: https://www.youtube.com/watch?v=YVbNcTmA5LQ

Wondering if anyone has attempted to/successfully installed a combloc side rail (molot or similar) on their SKS in a Hush Holster stock? How much did the stock need to be filed down, if at all?

As the title states, I recently got that firearm. Been taking it out to the range and even doing a little skeet with it lol, but I'm pretty sure I need to drop the stock a bit. It sits a bit too high on my shoulder and for it to sit more naturally, I have to tip my head unnaturally to accommodate. L

But, the firearm didn't come with a shim kit, unlike another shotgun I own. I also can't find a shim kit for it, but the instruction manual has instructions for adding shims. What recourse do I have here? Should I take it to a gunsmith for fitting?

It's super fun to shoot but for me to have my head not tilted and stuff while looking down the sight, it basically just hammers my collarbone area lol.

I’ve been recommended to soak my bolt/firing pin of my TM22 in solvent to completely dissolve any grease etc from the factory and then add a high quality silicone lubricant to it to see if it fixes the feed issues etc.

Is it recommended to clean it just with a field stripping or should I entirely disassemble the gun and clean every last nook and cranny?

I’ve reached out to Derya in terms of warranty as it had 4 or 5 OOB detonations as well as failure to feed.

Known issues: Putting 10/10 rounds in the magazine. 8/10 feeds better so I assume that’s a spring tension issue.

CCI Blazers have FTF issues, Aguilla interceptors aren’t as bad however with the TE mag sleeves on, they were having the OOB issues as well as horrific FTF issues.

It hasn’t had a ton of extraction issues but there’s been a few that typically go hand in hand with the FTF

Hi Guys. Because of my stupidity my new Henry H001’s firing pin is broken. But I have searched all the webs including ebay but no one sells this part in Canada. Does anyone know where can I buy this part in Canada?

Btw now I really know do not dry fire on your lever 💔

I took apart my Charles Daly m4 clone today to deep clean it and inspect components. As this shotgun has had a history of light striking from day 1. Upon inspection I noticed my firing pin has a bend in it. I want to know options for replacement.

I just got my first firearm (Savage MkII G), and am wondering if it's normal for the bolt action to have 2 distinctive stages when locking the bolt. I can slide the bolt forward and back smoothly. When pushing the bolt down to locked position it stops very stiffly at about perpendicular to the rest of the rifle, and then I can push it down further to fully locked. Is this normal? In videos of this rifle I don't notice folks pushing down twice, and it feels kind of awkward to do.

E: Here's a picture showing the three different positions

Have abunch of old guns that where stored in a unconditioned spaced that have rusted and im woundering the best way to get them cleaned up and back to usable.

I just received a new SBI ST-22 receiver and the top charging handle is completely stuck... I can't pull it out. I tried lubing it up and no luck. Has anyone else had a similar issue?

Hello Team,

I have a remington 870 tactical express, I juat noticed one of the screws on the picatinny rail is missing. Can anyone tell me where I can buy a replacment? I saw it on amazon but it also saod frequently returned. I would appreciate any insight, as for size I dont know if its No.6 or No.8 but ill mic it at the shop tomorrow.

it's a standard short rail that came with the rifle.

also wanted, to ask if i Can change it from a slot screw to a torque screw, I saw an option for torque screws online but not sure if anyone has done it.

I have been trying to remove the stock for a good hour now. It doesn’t remove like a conventional stock does does anybody have any idea how to do it?

Found a piece of my SBI LPC bolt carrier, about as big as a finger nail clipping, in my trigger group while cleaning it after a range day.

Picture is of the BCG damaged.

Is it still safe to fire or is the BCG compromised?

Hello all, I should probably start with a little while ago I put a NCstar gas tube setup on there and it’s been a nightmare ever since (probably what I deserve for trying to bubba the thing) any time I fire it either doesn’t have enough strength to push the bolt back enough to full eject the round or the bolt stays and it needs a little tap to open and eject the casing. I’ve swapped gas tube with a buddies rifle and it cycles as it should, so I’m pretty confident from the small test and the couple reviews I’ve read lately that the ncstar tube is junk and I’m curious if anyone here knows a good solid place to find a new replacement gas tube or if anyone here is in Alberta and has one they can part with, thanks!

Does anyone know how to remove the adaptor covering the trigger pins? I stripped the entire lower and can’t figure it out. Also can’t find anything online.

I have a KS7 and the trigger transfer bar broke. Where do I get a new part for this here in Canada?

Not sure what happened. I went to take it to the range last week and I noticed that this part was rattling. The 4 bolts that hold it place are gone. Can I just order the screws and put it back on or I have to bring it to a gunsmith?

Hi all. Just got my TM22 Pro, and I was preparing it and noticed that it fires even when on safe. Sometimes when it's in fire, it does not fire, or slam fires (like the Sigs) Anyone know how to fix it?

Hey people, I have a marlin 89C .22 inherited from a passed away relative that I really would like to keep.

I’m just wondering since I know nothing about gunsmithing and repair, it doesn’t eject spend casings. Would it even be worth taking to a gunsmith?

Hey has anyone got pics or experience with putting an optic plate on a norinco 1911 with LPA cut?

Has anyone built a 10/22 using a Dlask receiver? I bought one of their receivers and a Shaw barrel. There is no way the barrel is fitting in the receiver without modifications. Anyone know if they use a proprietary barrel size?

I was shooting a arminius 44 magnum westurn single action in-till the backstrap metal part snapped it was because the backstrap screw was loose i looked online for the part but its all out of stock and they dont make the part anymore so unless somebody sells one idk how i will get one. after i tightened the backstrap screw the grip felt pretty stable and not wiggly but seems unsafe should i just wrap it all in tape or what

I just received this (new to me) cz 457 in 17 hmr and wondering if this is normal or not.

The barrel is just not centered and cannot be centered in the forend, and it’s a bit wobbly.

There is no wobbling between barrel and action, and it just seems this synthetic stock is bending under plain finger pressure so maybe got crooked by previous owner.

Hopefully this makes sense…

I did have a longer term plan to switch to mdt oryx but maybe this needs to happen earlier than I thought…

Thanks !

I have those magazines but for some reason something is wrong and they just don’t work in any 5.56 rifle I tried.

The bolt just gets stuck on lips somehow and doesn’t even touch the round to feed.

I would appreciate if anyone could share their experience. I am sure they are good brand and should work :)

Thanks !

Anyone know how to remove the crossbolt safety on the heritage arms mare's leg? I've seen that for other similar firearms you push it in half way then rotate. I tried that on this thing and it doesn't seem to work.