r/canadaguns • u/chaugh1 • 9d ago

Fix my gun Tm22 constant light strikes / feeding issues / bolt locked half open

I bought a new tm22 from FOC back in June (OG 18” full metal one). Finally had the chance to shoot it today and it wasn’t a great experience to say the least.

Before I went to the crown lands I ran a patch down the barrel and did a light lub around the bolt area with some hoops live (I just took out the guiding rod and spring but didn’t dissemble the bolt).

Cci blazer: completely unusable. Every 2-3rd round was a light strike.

Aguila super extra: slightly better but a light strike every 5 rounds or so.

Cci mini mag: best, maybe one light strike every mag.

On top of this, I will get a double feed or stove pipe about once every 25-30 rounds

Sometimes the bolt would lock half open (no idea what’s going on here) and I’d have to twiddle with it with the mag out and and toggle the safety until I could get the bolt fully open to pull out the stuxk round.

Anyone else have similiar issues? I’m about to send this back for a warranty (but I am not expecting too much).

8 Upvotes

83% Upvoted

28 comments sorted by

View all comments

1

u/NeruLight 9d ago

You’re likely running it too dry. As a few others have said you need to generously lube the bolt. It’s not the same design as a 10/22 which can run basically bone dry. The bolt is catching on the receiver. Just make sure you don’t get lube in with the firing pin.

0

u/chaugh1 9d ago

Perhaps, though the gun is brand new and I already applied lube around the bolt assembly. A well made gun brand new should need to be fully dissembled to cycle properly more than 3 times in my opinion.

I’ll definitely do what you suggested though.

1

u/Even-Somewhere-9554 8d ago

I even strips and lubes all American-made, Italian-made