r/canadaguns • u/WasPremeditatedOK • May 25 '26

Buy recommendations Watch my local gunsmith make 200$

This is the second time this happens (after 500 rounds and +115 rounds after that).

Because I re-screwed the picatinny rail screws and added blue loctite myself (which wasn't done from the factory), I've voided the warrant for this component according to Stoeger Canada. So basically I can't screw in my own loose screws without voiding warranty on the screws and threads.

I was gonna recommend all Beretta 1301 owners to loctite their thread when they buy their brand new shotgun, but I can't even properly recommend that.

Fml

251 Upvotes

97% Upvoted

86 comments sorted by

View all comments

30

u/[deleted] May 25 '26

[deleted]

12

u/WasPremeditatedOK May 25 '26

Thanks for the advice. My local gunsmith will check the threads and see if they need to be redone. They also guarantee their work, so if it pops off again they will fix it. So after this, hopefully no issue. Also, its possible the threads and or screws were slightly damaged the first failure, which lead to the second failure? Can’t know for sure now i guess

2

u/Competitive_Cow7583 May 26 '26

So this is the exact reason I will
Always
Replace screws if I have to remove them. Especially in the case of fine thread pitch and small diameter screws
The beretta uses an m4-0.7 screw. Be sure
You’re using high quality new screws anytime
You remove a red dot or a rail from your receivers.

I order mine in bulk from McMaster-Carr

1

u/WasPremeditatedOK May 26 '26

That's awesome info. Thanks!