r/canadaguns • u/AHangryBeaver • 13d ago

Fix my gun TM22 Issues

So, I will say it’s gotten “better” after putting about 350 rounds but my current issues are:

Not so much failure to eject but failure to chamber a round/cycle a round. - I’ve found loading 8/9 rounds per magazine instead of 10 makes a huge difference however I still get these squibs? No bullet stuck in the barrel but it just explodes in the chamber.

The Tommy enterprise Mag sleeves were a bit of an issue, they don’t quite seat properly without a love tap and yes they are the proper fitment and secured tightly. The current video attached actually broke the mag sleeve.

I’ll post a photo in a comment below showing what’s happening to the shells when it just jams them rather than propels chambering the round. No idea if it’s just the ammo (Aguila interceptor) or if it’s too high of spring tension on the magazine or if I have an actual issue with the action.

86 Upvotes

97% Upvoted

75 comments sorted by

View all comments

9

u/Nice-Background890 13d ago

Try something better than Aguila shit ammo, and deep clean it.

3

u/AHangryBeaver 13d ago

I’m open to suggestions. I tried CCI blazers and had a lot more extraction issues and feeding issues. Almost felt like it wasn’t powerful enough to cycle the action

5

u/Nice-Background890 13d ago

Try cci mini mags and clean it, tons of 22 ammo are wax covered and will gunk shit up fast.

2

u/CallMeSirJack 13d ago

Honestly I've put a ton of remington thunderbolts and golden bullets through mine and have a very rare failure to feeds or ejects, nothing this bad.

1

u/SSjGuitarist 11d ago

The first maybe 100 rounds I put through mine were cci stingers. And while I usually stick to cci, blazer or even standard gives me no trouble. The only feeding issues or extraction issues I’ve ever had have been on Aguilia (one or two rounds out of a 50 round box) and that norma tac22 with the extra wax on the rounds or something. I couldn’t shoot a full mag without an issue on that crap