r/canadaguns • u/NoGrapefruit1213 • Jun 24 '26

Feets / Collection / My build SCSA TaipanX 500 yards

Gallery image

Gallery image

Had a chance to stretch the taipan out to 500 yards today was a tad windy but for first time I’m happy the two holes in the plate are from previously with my .308 savage axis. the dents are all .223. I’m running a bushnell trophy 3-9x40. S&J nano linear comp

52 Upvotes

98% Upvoted

15 comments sorted by

View all comments

Show parent comments

2

u/TheSockington 15h ago

I gave it to my friend who purchased the rifle for hunting. His SVT40 isn’t allowed to be brought to the hunt camp anymore and wanted it.

1

u/JerkyMan360 15h ago

What’d you use to make the attaching point on the wood stock to mate it to the receiver?

2

u/TheSockington 14h ago

The original buttstock slips a bolt through the top of the receiver into a threaded hole on the buttstock. That same hole is threaded in a larger M10x1.5 thread probably for mounting to a machining jig. I used that thread and ran the bolt up from below so you wouldn’t see the head.

I made it in layers so it would be easier. I made a layer as thick as the lug on the back of the receiver and cut it out to fit nicely around the mounting point. Then glued a “cheek” on each side to enclose it as a single piece.

2

u/JerkyMan360 14h ago

Thank you🫡