r/canadaguns • u/Medical_Banana1586 • May 02 '26

Fix my gun Sks reassembly issue

Gallery image

Gallery image

Gallery image

Hey all

After many recommendations I got myself an SKS.

I just did a takedown and a cleaning thanks to some videos, but I’m having trouble putting it back together, namely when snapping in the trigger group.

I seem to have the mag assembled and trigger aligned well but I’m unable to snap it in place no matter how hard I push. Any help would be appreciated!

EDIT: Thanks everyone, indeed I just HIT IT EVEN HARDER!! It’s all clean and put back together

29 Upvotes

91% Upvoted

77 comments sorted by

View all comments

100

u/GhostOoOooo May 02 '26

90% of problems with the SKS can be solved by beating the fucking shit out of it. Godspeed.

27

u/NEUMANN-METALWORKS Neumann Metalworks May 02 '26

Very true and unironically why I love the SKS lmao

12

u/vARROWHEAD May 03 '26

Everytime I clean mine I am reminded

“This is how we fix problems on Russian Space Station!”

-Lev Andropov

2

u/ShadNuke May 03 '26

American components, Russian components, all made in Taiwan!!

2

u/vARROWHEAD May 03 '26

The hero we didn’t deserve and seldom remember

1

u/ShadNuke May 03 '26

Absolutely!

Definitely one of Peter Stormaire's best characters!

11

u/RydNightwish May 02 '26

This guy Simonovs.

4

u/Medical_Banana1586 May 03 '26

OKAY so after all of the great advice what worked was HITTING IT EVEN HARDER

1

u/GhostOoOooo May 03 '26

Haha trust the process, my friend. Glad you got it fixed.

3

u/Mercrantos2 May 03 '26

Strong rifle, made by strong Russian men. Can take many abuse, still shoot boolit reliable and mostly straight.

3

u/MilkIlluminati May 03 '26

if many comrade shoot many rifle of questionable accuracy, is like great swarm of arrow from bow of mongol god

2

u/AsparagusUnhappy5395 May 03 '26

Good for me to read after I just broke down my first SKS for the cosmoline clean 😂 I had to beat the ever loving fuck out of that retainer pin in the firing pin assembly.

1

u/Popfartshart May 03 '26

Can I just skip this whole process of taking it down by swishing it around in a big barrel of oil and then drying it off? I mean those loose tolerances will allow a total flush of every component without ever needing to take anything apart right /S

-3

u/Unlikely_Link_2284 May 03 '26

This is just bad advice and someone who has spent alot of money on the new prices is going to fuck up their rifle

6

u/GhostOoOooo May 03 '26

If you have gone hulk on your SKS and somehow broken it your genes should be tested.

-2

u/Unlikely_Link_2284 May 03 '26

Show me your sks and how tell me how you put it back together or what do you even do to clean it ?

3

u/GhostOoOooo May 03 '26

What is this, SKS school? All I'll say is my 3lb dead blow might as well be zip tied to my SKS with how often they elope. She runs just fine.

-6

u/Unlikely_Link_2284 May 03 '26

Yah man because I think you need some schooling. Good luck beating your sks with a 3 Lbs hammer What does elope mean ? What i dont like is peaple that haven't a clue. Telling someone about how they should take care of their firearms that could lead them to a a problematic situation or a dangerous fire arm. So you telling peaple that they just need to spray it with G96 is not good advice The bolt and firing pin absolutely needs to be cleaned with hot water and simple green Dried then use G96 The whole firearms gas system should be treated this way

5

u/GhostOoOooo May 03 '26

Holy FUDD LMFAO

-1

u/Unlikely_Link_2284 May 03 '26

Yah man I am no fudd That is just your way of deflection that your comments are shit and of no use to anyone with intelligence I care about this community and giving peaple the best possible advice

5

u/GhostOoOooo May 03 '26

The SKS is not a Swiss watch. It is over-gassed as fuck from the factory, made from billet steel with obvious tool marks, and can handle a lot more abuse than I think you realize. They aren't exactly precise pieces of engineering. Sometimes, you have to beat them a bit to get things to fit back after full disassembly. I don't know what else to tell you.

1

u/Unlikely_Link_2284 May 03 '26

Actually you cant tell me anything about these rifles I think your struggling to come up with things to try to show me you might possibly know maybe something I have shot these rifle for years decades Actually I know what they need to be cleaned to be able to put away and be able to shot again Good luck with yours and your shit method of just spray it with G96 and put it away Stuck gas piston in the gas tube G96 IS GREAT But you have to do your part also Im done

→ More replies (0)

3

u/GhostOoOooo May 03 '26

I also never told people they just need to spray G96 in their SKS.

-6

u/Ok_Rush_246 May 02 '26

And not taking it apart in the first place

3

u/Unlikely_Link_2284 May 03 '26

What does this even mean You have to take these apart

-2

u/Ok_Rush_246 May 03 '26

Why? If it’s not broken why take it apart?

5

u/Unlikely_Link_2284 May 03 '26

So you have never owned one or yours is rusted . Corrosive ammo How does one clean that with out disassembly?

3

u/Ok_Rush_246 May 03 '26

Nah I’ve had 3. You think troops were ripping their SKS apart after firing? They were issued with oil cans and cleaning rods for a reason.

With corrosive ammo you are worried about the bore and the gas piston. No need to disassemble for that.

3

u/Hot_Cheesecake_905 May 03 '26

For cleaning? Most SKSes come covered in cosmoline anyways.

-2

u/Ok_Rush_246 May 03 '26

Hell no. Spray it with G96, wipe off the excess and shoot it. These SKS are made from low quality metal and have low quality finish (like bbq paint). They need the grease in them. Taking it apart is a pointless exercise that results in the OP’s issue

2

u/Unlikely_Link_2284 May 03 '26

G96 will still rust an sks You have to get the corrosive salts out Hot water and simple green. Let dry and G96

-2

u/Ok_Rush_246 May 03 '26

No, G96 will work just fine.

And do not spray a gun with simple green🤦‍♂️

0

u/Unlikely_Link_2284 May 03 '26

Realy you just said I didn't TELL one to just spray g96 And you should absolutely use hot water and simple green to get the corrosive salts out NOW I KNOW YOU DONT KNOW SHIT

1

u/Ok_Rush_246 May 03 '26

Yes just use G96. Apparently Ballistol works the same. It really is that simple. No need to be rude, you’re not the only one doing unnecessary stuff because they took poor advice seriously.

2

u/Unlikely_Link_2284 May 03 '26

I guess some of us just like to take care of things we have bought G96 will not stop the corrosion from the corrosive primers

-1

u/Ok_Rush_246 May 03 '26

No, some of us wasted time doing unnecessary work because of inexperience

3

u/Unlikely_Link_2284 May 03 '26

This is absolutely a bull shit response

1

u/Hot_Cheesecake_905 May 03 '26

 Taking it apart is a pointless exercise that results in the OP’s issue

You really should clean the bolt on a new SKS. The firing pin needs to be free floating or there is a chance of a slam fire.

You've never disassembled a SKS for cleaning? They're not that hard to put together once you've done it once.

-1

u/Ok_Rush_246 May 03 '26

I certainly have, you also don’t need to take the trigger guard off to clean the firing pin.

Again, G96 is your friend.

0

u/Unlikely_Link_2284 May 03 '26

Ok the bbq paint is because they have been refurbished. They came blued from the factory And if they where built with low quality metal that would mean that you would have to take even better care or it or it will rust to the piont being useless (not a battle rifle ) Earlier ones did not have chrome lined barrels and they need even more care. Then later they added the chrome lined barrels to help with corrosive ammo All did not come with bbq paint Tell me you nothing about these rifles by just your statement above

1

u/Ok_Rush_246 May 03 '26

I’m aware of where the bbq paint comes from 🤦‍♂️

They all rust easily. You do not need to take the friggin trigger guard off.

1

u/Unlikely_Link_2284 May 03 '26

Do you soak your stock with water when you clean yours. How do you get the corrosive salts out These are great fun rifles but they do require a food amout of cleaning I personally disassemble all the metal components from the wood stock Fill the sink with hot water and simple green And clean everything. Gas tube and piston. Bolt and firing pin, barred action magazine

1

u/Ok_Rush_246 May 03 '26

Why are you soaking the stock? Basic field strip is as far as you need to go