r/canadaguns • u/NEUMANN-METALWORKS Neumann Metalworks • 13d ago

Feets / Collection / My build Quadruple picatinny'd up, on a Sunday afternoon. Hella picatinny, the sun is still out my hoser

Gallery image

Gallery image

128 Upvotes

97% Upvoted

27 comments sorted by

View all comments

Show parent comments

2

u/NEUMANN-METALWORKS Neumann Metalworks 13d ago

It's 100% ready to go just haven't had time to take pictures or record an install tutorial for if. If you're confident in your ability to properly mark and drill 3 holes into the receiver (with a cobalt bit I provide) you can install it

2

u/BrotherLefthand 12d ago

Were you able to get your hands on the optic rails from your supplier to go with it?

3

u/NEUMANN-METALWORKS Neumann Metalworks 12d ago

Yes, comes with everything you see in this image:

1

u/BrotherLefthand 12d ago

I could kiss you. Have you tried other AK rails? I don't love the dual pic blocks.

2

u/NEUMANN-METALWORKS Neumann Metalworks 12d ago

I think the midwest industries style ones don't work, as they shoot inwards at a hard 45 degree angle. Like they just don't work with the SKS itself, it hits the bolt/cover.

There's the Zenitco knockoffs, they work but require some minor filling on the rear side (as do these ones, which I've pre-done for the user) to keep it 100% aligned horizontally.

Then the other I know of is no rail, just two scope rings. Never tested it! And one that's sort of a small weaver-style rail, it looks like it would work.

Rule of thumb is if it juts out too far inwards at a sharp angle (Midwest, Master Mount etc.) to try and be flush with an AK receiver it probably won't work. These ones I provide are nice and curved on the interior.

2

u/N-0-M 12d ago

Curved for my pleasure?