r/canadaguns Mar 23 '26

Gun and gear reviews “Brand new” Pedersoli sharps from basspro

Got a brand new in box Pedersoli 1874 sharps in the mail today from Basspro and well yikes…. What should I do? It’s obviously been very well used. Is this a return angle?

0 Upvotes

39 comments sorted by

21

u/FluffyPlays22 Mar 24 '26

return the borescope

2

u/frustratedpopo Mar 24 '26

What’s wrong with borescopes?

7

u/FluffyPlays22 Mar 24 '26

There's nothing actually wrong with borescopes, it's just most people don't know what they are actually looking at. OP saw some fouling from testing/proofing and possibly some packing oils and called it 'obviously well used'

1

u/frustratedpopo Mar 24 '26

Ah ok. I get what you’re saying. I own one and every time I use it I end up getting concerned about something I know nothing about. Then I run a bore snake through and the problems go away. I wish there was a good resource for what can be seen.

1

u/Canadian-gun-nut Apr 01 '26

This right here lol

-13

u/Altruistic_Split9447 Mar 24 '26

Scared of data?

23

u/ExplodingNinja9 Mar 24 '26

I'm no expert, but isn't it normal for a firearm to be proofed by shooting a few test rounds through it? Maybe this is just a military thing though.

1

u/Canadian-gun-nut Apr 01 '26

It is absolutely NOT just a military thing, and from what I can see this is actually a very new firearm that has been fire tested with some packing oils 

14

u/CurlyWurly61 Mar 24 '26

"Very well used" would be a slight exaggeration. Believe me when I say I understand your frustration with seeing it not being brand new, as i'm pretty anal myself... BUT... good news is:

They shoot rounds through the barrel as part of their Quality Control to ensure it is working and shooting properly.

12

u/waitwhatnothing Mar 24 '26

In what way is it obvious that it’s very well used? Have you looked at a lot of new barrels with a bore scope? 

1

u/Altruistic_Split9447 Mar 24 '26

Yea I have looked at several KS arms barrels and 2 IBI barrels

6

u/waitwhatnothing Mar 24 '26

Doesn’t look too bad to me, saw your other post with the patches too. I would assume there’s some combination of fouling from test firing and preservative. I’d rather have a little gunk in the barrel than rust from being left squeaky clean. 

2

u/CalibreMag Mar 27 '26

Barrels are not test-fired.

7

u/Parratt Garand Guy Mar 24 '26

Looks like basic fouling from the proof house.

Run some JBs bore paste through it. I bet itll shine right up.

1

u/Altruistic_Split9447 Mar 24 '26

It did clean up but check out my new post. Unless they shot black powder through it at the factory I’d say it was used

4

u/Parratt Garand Guy Mar 24 '26

I cant see your new post yet

Fwiw. Pedersoli guns are sent to a third party proof house for test firing after assembly. So its definitely been shot before it even came to Canada.

1

u/Altruistic_Split9447 Mar 24 '26

Basically all guns are test fired but I was pulling brown rusty patches. You’ll see them when my new post goes up / gets loaded

1

u/Parratt Garand Guy Mar 24 '26

Most north American manufacturing is random sample test firing, not every gun, unlike Europe where CIP mandates it for commercial sale.

Any chance this was a model sitting on their gun rack and its just preservation oil turns tacky and thick?

I still wouldn't be worried about it. Go shoot it. (Unless your new post has some actual rust pitting we cant see)

3

u/Altruistic_Split9447 Mar 24 '26

Hey thanks for sharing. I had no idea that CIP in Europe had a mandate to test every gun for commercial use. It absolutely could be some kind of oil that turned brown and tacky

I think you just talked me off the ledge. Cheers

1

u/Parratt Garand Guy Mar 24 '26

What model sharps is it?

Ive had several of them and they all shot great.

How long till you get a obnoxiously long Malcom scope?

1

u/Altruistic_Split9447 Mar 24 '26

It’s that cheap model that basspro just sold out of. It’s the pedersoli 1874 sharps “hunter”. It’s a discontinued model apparently. The fit and finish is honestly great. Barrels a bit thin and it is a 1-18 twist. Barrel length is 30”.

I got it for $1299. Which is a steal I think. I also shoot a Pedersoli tryon 45 cal target rifle and the things an absolute hammer. As far as black powder muzzle loaders go.

Switzers April auction should have a couple Malcom’s for sale. You might catch me bidding on those =D

10

u/ThePoeticJester Mar 24 '26

I dont see "tons of wear" but if youre not happy then contact cabelas?

1

u/Altruistic_Split9447 Mar 24 '26

That would be way to sensible

1

u/ThePoeticJester Mar 24 '26

*too

Hahahaha nah all good you do you, I buy old ass guns so they always show up caked in carbon and cosmoline

3

u/GFN_good_for_nothing Mar 24 '26

I’m sorry I won’t be able to help because I’m too much of a newb to even understand what’s happening here. That being said I’m very eager to learn about all things firearm-related, can you please explain what I’m looking at in your video?

5

u/GreenCactus223 Mar 24 '26

Don't look too deep into this... it's unnecessary. You can shine a light and take a look but always think about that your getting vs what you paid for.

0

u/Altruistic_Split9447 Mar 24 '26

New gun barrels are bright and shiny while used ones appear “dirty” like in this video. I’m not sure if my posts are private but I’ve published other videos on Reddit of my scoping brand new KS arms and IBI barrels

2

u/TheRealTwooni Mar 24 '26 edited Mar 24 '26

Isn’t Pedersoli quality dubious at best? Probably just from the test shots at the factory

2

u/MoosedMilk Mar 24 '26

Dubious? Ive been very pleased with Pedersoli over the years. Had several of them.

1

u/Altruistic_Split9447 Mar 24 '26

Pedersoli make great stuff indeed. Not sure what’s going on with this one

1

u/TheRealTwooni Mar 24 '26

Maybe it’s just gun-snobs. But there have been reports of their quality control slipping since the pandemic.

3

u/Murray3-Dvideos Mar 24 '26

They dont always hit the nail on the head thats for sure. I straight up returned one of their Traditional Hawkens due to absolutely dismal exterior finish. It looked like it had been stored in a humid sea can in Italy for a Summer. My budget tier Traditions Kentucky Rifle blew its fit and finish out of the water haha. My Pedersoli Sharps appear to have a super crooked tang. I had to shim the Pedersoli brand Tang sight like .035" over a 1/4 inch just to get it level. Makes the machining on an SKS seem surgical lol.

1

u/TheRealTwooni Mar 24 '26

Better watch out. The Pedersoli white knights are going to downvote you straight to hell for telling the truth of your experience!

2

u/DozerJKU Mar 24 '26

Those are speed lines bro! That doesnt look heavily worn. It looks test fired.

1

u/Altruistic_Split9447 Mar 24 '26

I think you’re right. Time to sell the borescope

2

u/Confident-Ad9628 Mar 24 '26

You wasted your money on the bore scope not the rifle, bore looks excellent don’t let your anxiety eat you away bro just shoot it

2

u/Dizzy-Wedding5769 Mar 25 '26

Looks good to me for a new firearm

1

u/Stevko_1 Mar 24 '26

tooling marks?

1

u/romayama Mar 29 '26

Dude, this is the unlapped new barrel that you will pass on to your grandkids. 45-70s just dont wear